Product Description for Link-A-Light ATTO680 Conjugation Kit
Properties for Link-A-Light ATTO680 Conjugation Kit
|Product Category||Labeling Kits & Reagents|
|Reaction||3 labeling reactions, each 100-200 µg|
|PDF datasheet||View Datasheet|
|Manufacturer||Acris Antibodies GmbH|
|Material safety datasheet||MSDS for Link-A-Light Atto680 Conjugation Kit|
|Background||The Link-A-Light conjugation kit allows Fluorescent conjugations to set up in seconds, simply by adding a solution of the antibody to be labeled to a proprietary lyophilised mixture containing a proprietary activated Fluorescent Ligand (Figure 1).
By circumventing the desalting or dialysis steps that commonly interrupt traditional protein conjugation procedures, Link-A-Light technology can be used to label small quantities of protein (see Principle).
Label: Atto680 is one of a new generation of Fluorescent labels. It has a strong absorption at 670nm, high fluorescence at 710nm (extinction coefficient 1.25 x10e5 cm-1M-1). It also has a good stokes shift and high quantum yield.
|Protocols||1. Before you add antibody to the Link-A-Light Mix, add 1 µl of Link-A-Light Modifier reagent for each 10 µl of Antibody to be labeled. Mix gently.
2. Remove the screw cap from the vial of Link-A-Light Mix and pipette the antibody sample (with added Link-A-Light Modifier) directly onto the lyophilised material. Resuspend gently by withdrawing and re-dispensing the liquid once or twice using a pipette.
3. Place the cap back on the vial and leave the vial standing for 3 hours at room temperature (20-25°C). Alternatively, and sometimes more conveniently, conjugations can be set up and left overnight, as the longer incubation time has no negative effect on the conjugate.
4. After incubating for 3 hours (or more), add 1 µl of Link-A-Light Quencher FD reagent for every 10 µl of antibody used. The conjugate can be used after 30 minutes.
|Storage||Storage of Conjugates: For any new conjugate, initial storage at 4°C is recommended. A preservative may be desirable for long-term storage. Other storage conditions (e.g. frozen at -70°C or stored at -20°C with 50% glycerol) may also be satisfactory. The best conditions for any particular conjugate must be determined by experimentation.
Storage of Kit: The kit is shipped at ambient temperature in a tamper-evident polypropylene container. Store at -20°C upon receipt.